I know a lot of you PSP fanboys out there are still wondering how I manage to get those cool screenshots from my PSP. well you can stop wondering now because after this post, you too will be capturing screenshots from your PSP just by pressing the NOTE button. Sounds simple right?

Requirements:

1. A Fat or Slim PSP installed with 3.71 M33 or higher custom firmware. This means it will also work with 3.80 M33 custom firmwares.
2. A USB Cable to enable connection between your computer and your PSP.

Instructions:

1. Download the screencapture pack I’ve prepared to anywhere on your computer.
2. Unzip the file you’ve downloaded.
3. Connect your PSP to your PC using a USB Cable. Check if you have already the seplugins folder on the root of your memory stick. If you don’t have it yet then proceed to step 4. If you do already have it then proceed to step 5.
4. Do this only if you don’t have the seplugins folder yet. Copy the seplugins folder from your computer to the root of your memory stick.
5. If you did step 4 then skip this step. You only have to follow this step if you already have an existing seplugins folder. Copy screenshotbmp.prx from the seplugins on your computer to the seplugins folder on the root of your memory stick. Now go to the seplugins on your memory stick. If you have vsh.txt already present, you have to open the file and edit it. Open it in Notepad or any text editor and add these code in a new line: ms0:/seplugins/screenshotbmp.prx
   Check if you also have pops.txt and game.txt present on your seplugins folder in your memory stick. If you have it then do the same routine, edit it and paste that line of code in a new line. Otherwise you can just grab the game.txt and pops.txt from the file you’ve downloaded.
6. Disconnect your PSP from your computer. Now open the recovery menu. How? Turn off your PSP then turn it on again while pressing the R button. On your recovery menu, go to Plugins and enable all the screenshotbmp.prx plugins. Exit the recovery menu.
7. Try it on your XMB. Press the note button. You will know the screenshot plugin is working when an inverse color of your screen will sweep from the bottom to the top. The screenshot will be saved on your PICTURES folder on your memory stick and you can also view it by going to Photo > memory stick on your PSP.

If you have any questions or reactions about this guide, you can use the comment form below. The screenshot plugin was programmed by TyRaNID and ported by Weltall to the M33 custom firmwares.

I know this post is a little bit late. It’s more than late, probably, but there are still a lot of guys asking me to make this tutorial. I’ve been very busy the past few days that’s why I haven’t been updating too much. But because you guys asked for it, I’ll give it to you. Well, here you go. This is the ultimate guide on how to add the 1.50 kernel add-on for your 3.71 M33 or higher.

REQUIREMENTS

Be sure you meet all the requirements before attempting to do this process.

• A PSP Fat (No it does not work with a SLIM) with 3.71 M33, 3.71 M33-2 or 3.71 M33-3
• Make sure you have the GAME folder configured to 3.71 or the program won’t start. How? Enter the recovery mode and go to Configuration -> Game folder homebrew. It should read Currently 3.71 Kernel
• A USB that will connect your PSP to your PC
• A keen and watchful eye and a brain that will help you follow and read the instructions very carefully

If you meet all those requirements then you are good to go.

INSTALLATION GUIDE

1. Get the 1.50 Kernel Addon on the QJ download site. Once on the page, scroll down a bit, and you’ll see an orange button that is labeled “Download”. Click that button and save the file to your computer.
2. Extract the file and you will see and UPDATE folder. Connect your Fat PSP to your PC with a USB cable. Copy and paste the UPDATE folder from your computer to your PSP ms0://PSP/GAME/
3. Download the 1.50 Firmware here. Connect your PSP to your PC and copy the 150.PBP you’ve just downloaded into the ROOT of the memory stick.
4. Disconnect your Fat PSP and on the XMB menu, go to GAME > MEMORY STICK and you’ll find the 1.50-2 update. Run the update and press X to agree with the installation. After the installation, the program will auto-exit.
5. Done! You can now install homebrew applications. Visit this post for a list of 1.50 homebrew apps and learn how to install them.

Now, wasn’t that too easy. Remember, before asking for help on the comments, please read this post very carefully. Make sure you meet the requirements and make sure you follow the guide step by step. Thank you and if you have more requests about the PSP just leave them on the comments are.

It’s been days since Dark Alex has released something for the PSP homebrew community but with his return he brings you the third update for his 3.71 M33 custom firmware. If you’re wondering what’s new on this update, well here they are exactly according to DAX:

• Fixed a bug in access to flash by usb.
• HEN core: kernel prx’s with syscall exports work again.
• PSP Slim: programmers can set the size of user memory to 52 MB by using a sfo flag.
  Check sample in sdk for usage.
• March33 NO-UMD driver:
  * Fixed a bug that could hang the psp when exiting with home.
  * Fixed compatibility issue with Castlevania Dracula X Chronicles, and maybe more games.
• Vshmenu: it wasn’t displaying properly with psp slim TV-OUT due to the change of resolution. Fixed.

Below are the easy steps on how to do the update on your PSP.

Requirements

• A PSP with 3.71 M33-1 or 3.71 m33-2 Custom Firmware
• USB Cable for PSP to PC connection

Instructions

1. Download the files here.
2. Extract the contents of the file. Grab the UPDATE folder and copy it into your memory stick to the directory PSP/GAME/.
3. On the XMB menu go to Games > Memory Stick and run the update. You will be asked to press X to start the update. Do so. The program will exit automatically and restart your PSP. You now have a PSP 3.71 M33-3 PSP

About the popsloader, I haven’t been able to try it yet. Actually I haven’t been using it for quite sometime. I really dig the new games around. But I’ll be glad to write something about it if a lot of people asked. Thank you all.

UPDATE: You can now skip this guide and go directly to the 3.71 M33-4 update. I wrote a guide on how to add the 1.50 Kernel Add-on for 3.71 M33. Please check it out if you need it.